For more serious wood workers who want to try the screws and the INSTY-BIT. The pack gives you a usable quantity of each size with 25 each of the most popular sizes.
Includes
130 #8 Gauge screws from #8 x 19 mm (3/4") to 37 mm (1-1/2") Flat head steel with samples of Round Washer head, Truss head, Brass, Stainless and cover caps. It also includes a #2 Power Driver bit and 7/64" INSTY-BIT Drill/Countersink. You will be impressed by the INSTY-BIT Drill/Countersink even without the Quick Change Chuck. Again we think you will like them and we are that confident we give you a credit note so you can get five dollars back when you place an order for $30.00 or more.
At the early Timber and Working with Wood shows we had quite a few wood turners wanting to buy a few of each of the big heavy #12 gauge screws for face plate work. This pack proves to be very popular.
Includes
12 each of the #12 x 19 mm (3/4") to 37 mm (1-1/2") and 6 of the #12 x 50 mm (2") together with a #3 Power driver bit.
When you want a great selection for serious wood work this is the pack. It is a good, practical selection for those who need a wide cross section of sizes in the workshop and gives you a great introduction into the Robertson Screws system.
Includes
500 #8 & #10 gauge Steel screws from #8 x 19 mm (3/4") to #10 x 75 mm (3") Flat head Steel screws plus a #2 Power driver bit and a #2 Hand Driver. The screws are all packed separately in packs of 25, 50 or 100, the most popular sizes (such as #8 x 25 mm (1"), #8 x 31 mm (1-1/4") #8 x 37 mm (1-1/2") being supplied bags of 100 while the less common sizes are in bags of 25 or 50.
The perfect system for Pocket Hole Jointing.
Includes
The basic set consists of a pair of drill guide blocks with interchangeable bushes, a 3/8" Counterbore drill, 100 #6 x 31 mm (1-1/4") Face frame screws, 100 #7 x 37 mm (1-1/2”) Face
frame screws and a #2 x 150 mm (6").
Power driver bit. It lets you start doing pocket hole joints using your own clamping system.